Fuse33 Face Shield System MV-2D

Fuse33 Face Shield System (MV-2D)


Now available for order by the general public.

Volume Discount:  Save 20% on orders of 15 units or more with discount code SHIELD20.

The Fuse33 Face Shield System has been designed in collaboration with other makers and is manufactured at Fuse33 Makerspace in Calgary, Alberta.

Components: Laser-cut acrylic head frame with closed-cell EVA foam cushion, mylar or acetate (supply dependent) visor and elastic stretch strap.

This product is sold non-sterilized.

Disclaimer: Wearing the face shield is an additional protection measure to face masks and does not replace protection protocols advised by Healthcare professionals and Alberta Health Services. Use at your own risk.


The Fuse33 Face Shield System (MV-2D) is intended to help prevent splashing liquids from impacting the face. As the stretch strap is adjustable, it is meant to be worn by a variety of different head sizes.

The visors themselves are also easy to replace, with the main benefit of our solution being that in an emergency, replacement visors can be made in the field by hand using materials such as blank letter-sized Mylar sheets around 0.38 mm (0.015 inches) thick or less and a standard-sized ¼ inch (6.3 mm) hole punch, both of which may be purchasable at any standard office supply store.

To clean, simply soak in or wipe down all components with a 10% bleach solution.


  • 1x Fuse33 Face Shield Head Frame
  • 1x Replacement Face Shield (MV-2D) Mylar Visor
  • 1x Elastic Stretch Strap


  • Head Frame: 125 mm x 195 mm x 3 mm (Acrylic)
  • Visor: 216 mm x 280 mm x 0.25 mm (Mylar)
  • Weight: 45g

Note:  This product is sold non-sterilized. For personal use only. For use by adults 18 years of age or older.

Directions for Use

  • Remove protective covering from both sides of head frame.
  • Attach visor to head frame by starting on one side of the frame and lining up the visor holes to the appropriate pegs in the frame. Insert pegs into holes and continue on until the other side is reached.
  • Attach stretch strap to head frame by aligning holes in strap to the mounting arms of the frame. The straps have multiple mount points to accommodate a variety of head sizes.
  • To clean, soak or wipe down all components of the face shield in a 10% bleach solution. Wipe dry.

Important:  Not designed to be autoclaved. Not dishwasher safe. Best when used along with a face mask or covering and appropriate protective eyewear. Dispose of the visor responsibly.


  • English User Guide (PDF)

You may also be interested in:

Additional information

Weight 0.045 kg
Dimensions 21.6 × 28 × 0.5 cm


You may also like…